It is Suitable for all kinds of the premade bags, such as zipper pouch, pillow bag, 3-side, 4-side and 8-side quad seal bags (box pouch), kraft bags and spout bags and so on..
It is widely used For lots of application such as coffee, frozen foods, cookies, cereals, nuts, flower, candy etc.
We have experienced team of R & D engineers who can customize packaging solutions according to your product characteristics.
1. Easy to operate,adopt advanced PLC from Japan Mitsubishi, mate with touch screen and electric control system, the man-machine interface is friendly.
2. Automatic checking: no pouch or pouch open error, no fill, no seal. the bag can be used again, avoid wasting packing materials and raw materials.
3. Safety device: Machine stop at abnormal air pressure, heater disconnection alarm
4. The width of the bags could be adjusted by electrical motor.
5. It matches with the glass safety door. The machine will stop working when you open the door. So that it could protect the safety of operators. At the same time, it could prevent dust.
6. The packing materials loss low, what this machine is used the preformed bag, the bag pattern is perfect and has a high quality of the sealing part, this improved the product specification
7. With different feeders changed to pack solid, liquid, thick liquid ,powder and so on
8. The packing bag suits in extensive range, suit for multi-layer compound, monolayer PE , PP and so on Preformed bag made by film and paper.
|Bag type||3 side sealing sachet/ stand up bag(doypack bag) / zipper bag /spout bag|
|Speed||6-15 bags / min|
|Bag size||Bag width: 90mm ≤ W ≤ 300 mm|
|Bag length: 100mm ≤ length ≤ 300 mm|
|Power supply||220V / 50HZ / 60Hz, single phase / 20 A;|
|Air consumption||0.5m3 / min 0.65Mpa;|
|Machine dimension||L: 1750mm * W:510mm *H: 1300mm|
|Mechanical building||SS304 3mm thick chassis / bearing / connecting parts;|
|Electrical configuration||PLC Mitsubishi from Japan|
|PID temperature control Omron|
|5.7 inch color touch screen; Delta from Taiwan|
|Pneumatic configuration||Pneumatic component AirTAC from Taiwan|
|vacuum generator PIAB from Sweden|
After receiving your inquiry,We will send you the quotation as soon as possible.